Regular inspection and maintenance of permeable brick machines are necessary. Before starting the machine, each part of the equipment should be inspected and hydraulic oil should be added according to regulations. If any faults are found during the inspection process, they should be promptly repaired to meet the requirements before starting the fully automatic permeable brick machine. Before starting the machine, it should be ensured that there are no personnel around the equipment and a startup signal should be sent to relevant personnel, Personnel in each position can only start the machine when they are in place. During the operation of the fully automatic brick machine production line, personnel are not allowed to directly touch or strike the operating parts of the equipment or mold paint with their hands to prevent other personnel from entering the equipment transportation area. They must maintain a certain distance from the equipment. During the operation of the fully automatic brick machine production line, it is not allowed to adjust, clean, or repair the equipment without authorization. In case of malfunctions, the machine should be shut down for maintenance; The batching and mixing equipment should be configured according to the capacity of the fully automatic permeable brick machine, and overloading should not occur due to the performance of the equipment. To avoid dust pollution of the hydraulic system, the fully automatic brick machine should be separated from other processes.